Hinge & Post Repair in Dallas, TX

Wrought iron

Wood & steel frame

Sliding driveway gates

LiftMaster operators

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Explore

Styles & brands we work with

01Wrought iron02Wood & steel frame03Sliding driveway gates04LiftMaster operators

Before & after

See the difference

Recent ProjectFull RestorationComplete Upgrade

BeforeAfter

BeforeAfter

BeforeAfter

Hinge & Post Repair in Dallas, TX

Hinge and post repair in Dallas typically runs $220 – $680 depending on whether we’re rebuilding a post footing, replacing a bent hinge, or re-welding a cracked bracket. Most jobs are done the same day, and you’ll know the price in writing before we touch a bolt. That’s how we work at Portcullis Gate Repair Dallas.

This is one of the most common Gate Repair calls we get, and it’s the one homeowners often don’t catch until the gate starts dragging, sagging, or refusing to latch. A gate’s hinges and posts carry every pound of the leaf, every cycle of the opener, and every gust of wind off the Trinity River corridor. When those parts fail, the whole system suffers. Call us at (325) 225-5440 and we’ll send a technician who can tell you what’s failed, why, and exactly what it’ll cost to fix.

We’re an independently owned Kingswell company, which means the repair gets backed by the 365-Day Done Right Promise: if the hinge or post repair fails inside that year, we come back and fix it at no charge, in writing, on every invoice.

When You Need Hinge & Post Repair

Hinge and post failures tend to announce themselves gradually, then fail suddenly. Here’s what Dallas homeowners see before they call us:

• The gate drags across the driveway. A worn hinge lets the gate drop at the latch side. You’ll see scrape marks on the concrete and hear metal grinding against the ground. In neighborhoods like Preston Hollow and Lake Highlands, where driveways slope toward the street, this wears a gate leaf down within months.
• The gate won’t stay closed or latched. When a post shifts even two or three degrees, the latch and receiver no longer align. The gate either bounces off the strike or never reaches it. This is the most common complaint we get from homeowners with ornamental steel gates on brick columns.
• The post wobbles when you push the gate. A post that moves at the base is losing its footing in the concrete pad. Left alone, the post will eventually lean far enough to bind the gate entirely. In Dallas clay soil, seasonal expansion and contraction under the pad can loosen posts over a few wet springs followed by dry summers.
• You hear a snap or a metallic pop when the opener runs. That sound often means a hinge bracket cracked or sheared. The gate still moves, but the broken bracket is transferring load to the post, the actuator, and every other hinge point. Continued use turns a one-hinge repair into a post replacement.
• Rust is flaking or staining the finish around the hinge. Surface rust is cosmetic. Deep flaking around the hinge barrel or the post weld means the metal is thinning from the inside. We see this most often on older driveway gates in areas like East Dallas and Oak Cliff, where decades of North Texas humidity and freeze-thaw cycles have worked their way into unprotected steel.
• After a windstorm or a vehicle strike. A hit from the bumper of a delivery van or a strong straight-line gust can bend a hinge leaf or knock a post off plumb. Even when the gate looks fine from fifteen feet away, the geometry is off, and the opener will work harder every cycle until something gives.

Our Hinge & Post Repair Process

We follow the same process on every hinge and post job in Dallas, whether it’s a light pedestrian gate in a backyard fence or a heavy automatic driveway gate on a steel post. You’ll know the price before we start, and you’ll know when we’ll arrive before the truck leaves our shop.

1. You call, and a live person answers. Not a callback queue. Not a voicemail. You’ll speak to someone at Portcullis Gate Repair Dallas who can schedule a technician and give you a real arrival window. You can also send photos if you’d like, but we’ll confirm everything on site.
2. The technician inspects the gate, post, and opener. We check the hinge barrels for wear and the welds for cracks. We test the post for plumb in both directions and look for movement at the footing. If the gate has an opener, we cycle it once under load to see how the post and hinges flex.
3. You get a written price before any work starts. This is the Kingswell Way. We tell you the number, we write it down, and you sign off before we turn a wrench. If the post needs a new concrete footing, the price includes the pour, the cure time if needed, and the re-hang. No add-ons at the end.
4. We make the repair. That may mean cutting out and re-welding a hinge bracket, replacing a pair of self-aligning hinges on a steel post, or pulling a post, re-setting it in fresh concrete, and re-hanging the gate to the correct reveal. On automated gates, we’ll re-check the opener’s travel limits afterward so the new geometry doesn’t strain the motor.
5. We confirm the gate swings clean, latches square, and cycles without strain. You’ll see the gate open and close before we leave. The work area gets cleaned up, and we hand you a written guarantee for the repair.

Hinge & Post Repair Pricing in Dallas

Here’s what you should expect to pay in the Dallas market. These are the ranges we quote over the phone before we’ve seen the gate, and they reflect the usual parts-and-labor cost for residential gates in this area.

What changes the number is the size of the gate, the post material, and whether we’re working around an opener that needs Lock Repair. A heavy steel driveway gate with a LiftMaster or FAAC operator takes more care to re-hang than a lightweight tube-steel pedestrian gate. If the post footing has cracked and the post has shifted, that’s a bigger job than a hinge swap, because we’re chipping out the old concrete, setting the post to plumb, and letting the new pour cure before the gate goes back on.

Some companies in Dallas price hinge work low and then find a reason to upsell you a new gate. We don’t do that. If your gate is salvageable, we’ll say so and fix the hinge or post. If the post is too far gone, we’ll tell you that too, with a written number for the replacement before any work is authorized. Estimates are free, and you’ll get the price up front every time. Call (325) 225-5440 to schedule one.

FAQs – Hinge & Post Repair

Can you fix a leaning gate post without replacing the whole gate?

Yes, in most cases we can pull the existing post, re-set it in fresh concrete, and re-hang the same gate. A leaning post doesn’t usually require a new gate unless the gate itself is cracked, severely rusted, or so far out of square that it can’t be re-hung cleanly. We’ll tell you which situation you have, and you’ll get a written price before we start. Call (325) 225-5440 and we’ll come take a look.

How long does hinge and post repair take in Dallas?

Most hinge replacements and re-welds are done in two to three hours, same day. A full post re-set with a new concrete footing usually takes four to six hours, and we’ll let the concrete cure before re-hanging the gate if the load is heavy. When you schedule, we’ll give you a real arrival window, so you’re not waiting around all day.

Is it cheaper to repair a sagging gate or replace the hinges?

If the hinges are worn, replacing them is cheaper than patching the gate around them. We usually replace hinges in pairs so the load is even; a single new hinge on one side just accelerates wear on the old one across the post. The cost is still well under a full gate replacement, and we re-hang the gate to the correct reveal as part of the hinge job.

Can you come out today?

Most hinge and post repair calls in Dallas are scheduled for same-day or next-day service. A live person answers the phone 24 hours a day, so if your gate is down and the opening is exposed, call (325) 225-5440 whenever you notice it. We’ll give you a window and a person to expect at the door, not a four-hour hold queue.

Key Takeaways

• Hinge and post repair in Dallas typically runs $220 – $680, with full post replacements on the higher end.
• Dragging, sagging, latching failure, and post wobble are the telltale signs of hinge or post trouble.
• Portcullis Gate Repair Dallas is an independently owned Kingswell company, and every job carries the 365-Day Done Right Promise in writing.
• You’ll get the price in writing before any work starts, and a live person answers the phone around the clock.

If your gate has started to sag, scrape, or wobble, we can fix it before the problem spreads to the opener and the rest of the gate’s hardware. Call (325) 225-5440 or schedule online through our home page. You can also read more about our full range of Gate Repair in Dallas services.

Written by Dean Prescott, Owner at Portcullis Gate Repair Dallas, serving Dallas.