Wrought iron
Wood & steel frame
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Farmers Branch
Gate installation in Farmers Branch usually runs between $1,400 and $4,800 depending on the gate type, operator, and what’s already in the ground. Most standard swing gate installations take one full day from excavation to final opener programming, and you’ll get a written price before any work starts. If you’re calling from Farmers Branch, we know your brick pillars, your clay soil, and your 1960s ranch layout better than any company driving in from outside the metro. Call (325) 225-5440 and a live person answers, 24/7.
We’re Gate Installation specialists, but around here that means more than bolting a panel to a post. Farmers Branch homes throw specific problems at you: brick columns that tilt with the seasons, original operators that predate modern safety sensors, and custom side yards that were never built for a standard gate kit. Our crews serve Farmers Branch directly, coordinated from our Dallas-Fort Worth office, so the technician who shows up already understands what your house is doing to your gate.
Why Portcullis Gate Repair Dallas Is Farmers Branch’s Preferred Gate Installation Company
Portcullis Gate Repair Dallas has been a Kingswell company since 2008, and Kingswell companies live by a written standard on every job: the price goes on paper before a single bolt is turned, the arrival window is real, the job site gets cleaned up, and the guarantee goes in writing on the invoice. That’s the Kingswell Way, and it’s not a franchise slogan. Every Portcullis location is independently owned and operated but held to the identical guarantee. Farmers Branch homeowners who’ve been burned by no-show companies or door prices that doubled call us because they want the opposite of that experience.
Our technicians are background-checked and arrive in uniform. You’ll know exactly who’s pulling into your driveway. We service nine major gate-operator brands including LiftMaster, DoorKing, Elite, FAAC, BFT, Linear, Viking, Ghost Controls, and Mighty Mule, so if your 1972 swing gate still has its original controls, the tech arriving already knows that system. Calls are answered by a live person around the clock. Not a voicemail tree. Not a callback queue. Not a next-business-day reply. If your gate fails at 2 a.m. and you can’t get your car out, someone picks up.
And the 365-Day Done Right Promise backs every repair we make. If it fails inside that period, we come back and fix it at no charge. Written guarantee, stamped on the invoice. That’s what Dean Prescott, our owner, holds every tech to on every job in Farmers Branch.
Styles & brands we work with
Gate Fabrication in Farmers Branch
Gate fabrication in Farmers Branch is often the only honest answer when your driveway opening was custom-built for a 1965 ranch home and no off-the-shelf panel fits it. Fabrication means we build the gate to your exact measurements, not the other way around. Narrow side yards along streets like Valley View Lane or Golfing Green Drive frequently have 10- or 11-foot openings that standard 12-foot panels will never fit without hacking the brick columns. We measure, weld or assemble the frame and pickets, match the metal to your existing fencing where possible, and hang it with hinges sized for the actual weight. A custom fabricated steel driveway gate in Farmers Branch typically runs $2,200 to $5,400 installed, depending on height, design, and whether it’s a single or double leaf.
Custom Swing Gates for Narrow Side Yards
Farmers Branch ranch homes from the 1950s and 1960s often have driveway gates hung between a house wall and a brick pillar, leaving maybe ten feet of swing room. Pre-fabricated panels don’t fit those openings cleanly. We fabricate the leaf to your exact clearance, including the sag correction bands most original gates never had, so the leaf doesn’t droop and drag on the driveway apron after a decade.
Pedestrian and Double Driveway Gates
If your lot has a separate walk gate next to the driveway, we can match the style and metal thickness across both. Double gates on wide Farmers Branch driveways need a center stop and drop rod to keep the second leaf from twisting in the wind, which is a detail we build in from the start. A custom double driveway gate with a matching pedestrian gate usually starts around $3,600.
Automatic Gate Installation in Farmers Branch
Automatic gate installation in Farmers Branch means more than mounting an operator arm and plugging it in. Many of the original operators in this area are pre-2010 LiftMaster or DoorKing units that can’t interface with modern UL 325 photo-eyes, which means they fail the entrapment protection standard every new installation must meet. The job involves running power to the gate location, setting the operator post, mounting the actuator, installing the safety edges and photo-eyes, and programming remotes and keypads. A complete automatic gate installation in Farmers Branch with a new operator, safety system, and two remotes typically runs $2,800 to $6,200 depending on the operator brand and how far the power needs to run from the panel.
Retrofit vs. Full Operator Swap
Some older systems can be retrofitted with external photo-eyes and a new control board, which usually runs $600 to $1,400. But if the original operator is pre-2010 and has already lost its internal safety logic, the retrofit won’t bring it into compliance, and you’ll spend more chasing it than swapping the whole operator. We’ll tell you which one you’re looking at before we quote anything.
Power Runs and Safety Edges
We handle the power run from your breaker panel to the gate, including trenching and conduit, so you don’t need a separate electrician. Safety edges on the gate’s leading edge and closing edge are part of the install, not an add-on. Every automatic gate we install in Farmers Branch gets safety edges, photo-eyes, and a written guarantee with the 365-Day Done Right Promise behind it.
Trusted Brands We Service in Farmers Branch
We carry parts for DoorKing, LiftMaster, and Elite locally, which means a control board or limit switch swap on a Farmers Branch gate doesn’t sit waiting on a truck from out of state. If your 1970s operator needs a part that’s no longer manufactured, we’ll tell you straight and recommend the right modern replacement from one of the nine brands we service, including Mighty Mule for lighter residential gates. Fast turnaround matters here because a gate stuck open is an open invitation, and a gate stuck closed traps your cars in the driveway.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Farmers Branch Homes
- Tilting brick pillars from clay soil movement. Original pillars in this area often sit on shallow, unreinforced footings, so spring rains swell the clay and push the pillar out of plumb. The gate binds, the latch stops meeting, and no hinge adjustment holds for long.
- Rust-frozen hinge pins on original ornamental steel. Gates hung in the 1960s and 1970s rarely got sag correction bands, and the pins seize from decades of summer humidity. The leaf droops and scrapes the driveway apron.
- Legacy operators without photo-eyes. Pre-2010 control boards fail from heat and power surges during thunderstorms, and they can’t integrate with new UL 325 sensors. A full operator swap is usually cheaper than patching.
- Driveway gates hung on narrow side yards. Custom-fitted gates from this housing era often get re-hung poorly by general contractors, leaving a leaf that swings fine for a year and then starts dragging as the post shifts.
Pricing for Gate Installation in Farmers Branch, TX
Here’s what Farmers Branch homeowners can expect to pay, in writing, before any work starts. A standard steel swing gate with manual operation runs $1,400 to $2,800. Add an automatic operator and the total lands between $2,800 and $6,200 depending on brand and power run distance. Custom fabricated gates start around $2,200 and run to $5,400. Sliding gates, which need a track and often a concrete pad, range from $3,200 to $7,000. The factors that move the price are the gate’s width and weight, the condition of your existing posts, and how far the power needs to run. We don’t quote over the phone and change it at the door. The written price is the price. Call (325) 225-5440 for a free estimate in Farmers Branch.
We Also Serve Cities Near Farmers Branch
Our technicians regularly work in Gate Installation in Farmers Branch and the surrounding metro. If you’re in Dallas, Plano, Grapevine, or Murphy, the same Kingswell Guarantee applies: written price, real arrival window, clean site, written guarantee. Call (325) 225-5440 and we’ll get you scheduled.
Serving Farmers Branch, TX - Our Local Coverage Area
We’re based in the Farmers Branch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Farmers Branch
Usually yes. We re-shim the pillar back to plumb using steel plate shims between the pillar and hinge, which costs $250 to $600 per pillar, and that holds in most cases. If the pillar’s footing has failed completely, meaning the whole column has shifted more than about an inch and a half and moving freely, you’re looking at a partial rebuild, which runs $1,800 to $3,500. Call (325) 225-5440 and we’ll tell you which one you’re dealing with after we look at it.
If the original control board accepts external sensor inputs, we can add photo-eyes and safety edges for $400 to $900. But most pre-2010 operators in Farmers Branch can’t accept those inputs and still pass a UL 325 inspection, so a full operator swap is the honest fix. A new operator with safety system installed runs $2,200 to $4,800. We’ll tell you which path applies to your gate before we quote anything.
If the gate binds only after heavy rain and the post visibly leans, it’s a footing problem. If the gate sags all year but the post is still plumb, it’s a hinge or sag correction problem. Our techs check the post with a level and measure any movement against the original placement. Call (325) 225-5440 for a free assessment.
Sometimes. A slide gate needs a track run at least one gate panel width beyond the opening, plus a concrete footing for the track and a receiver post. If your side yard has that room, the total runs $3,200 to $7,000 installed. If it doesn’t, we’ll fabricate a swing gate that fits the actual opening and works with your existing pillars.
For direct Texas sun, we prefer operators with metal gearboxes, which is why we install a lot of FAAC and LiftMaster units in Farmers Branch. Both handle heat cycles better than plastic-drive alternatives, and their control boards are more resilient to the power surges that come with summer storms. Call (325) 225-5440 and we’ll match the operator to your gate’s weight and your driveway’s exposure.
If your gate is stuck, sagging, or just doesn’t close anymore, call Portcullis Gate Repair - Farmers Branch at (325) 225-5440. Dean Prescott and the whole Farmers Branch crew will give you a straight answer and a written price before any work begins.
Written by Dean Prescott, Owner at Portcullis Gate Repair Dallas, serving Farmers Branch since 2008.