A Portcullis company - serving Dallas, TX
Portcullis Gate Repair Dallas gate repair team

Gate Company in Murphy - Fast Local Response, Upfront Pricing

Same-day gate service with the price agreed before we start. Licensed and insured engineers covering repairs, operators and access control across the whole area.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Call Now - 24/7 Dispatch

We answer around the clock

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Gate Company in Murphy, TX

Most gate repairs in Murphy cost between $180 and $340, and a full gate installation typically runs $1,200 to $6,800 depending on size, material, and whether you’re adding an opener. We’re Portcullis Gate Repair, a Kingswell company that’s been doing this work since 2008. Murphy keeps us busy for a specific reason: the homes here were mostly built between the 1990s and 2010s, which means a lot of driveway gates are hitting the age where hinges sag, actuators quit, and HOA notices start arriving. Call (325) 225-5440 and a live person answers, day or night.

Call (325) 225-5440

Why Murphy Homes Are Different

Murphy’s housing stock is overwhelmingly single-family, built out in large planned subdivisions over roughly three decades. That matters for gate work because many neighborhoods, Maxwell Creek and Rolling Ridge among them, went up with the same builders using the same gate styles. A technician who has repaired one ornamental steel gate in Rolling Ridge has usually seen thirty just like it, which speeds up diagnosis considerably. The brick and stone exteriors common here also mean gate posts are often set into masonry, so a post that shifts typically requires more than a quick re-shim.

Climate is the other factor. Murphy summers are hot and humid, and severe thunderstorms with high winds roll through often enough to warp wooden gates and corrode hinge hardware. We see a spike in opener failures after heavy storms, usually from moisture getting into control boards or wind knocking gates out of alignment so the safety sensors trip. If your gate starts creeping open or refusing to close after a storm, that’s not a coincidence.

Homeowners associations are active throughout Murphy, and many newer subdivisions have covenants that govern gate appearance. If your HOA requires a specific finish or style, we can match it rather than pushing a full replacement.

Explore

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Our Main Murphy Services

These are the three jobs we handle most in Murphy, each with its own dedicated page so you can get the full detail.

Gate Repair in Murphy

Swing gates and slide gates both fail in predictable ways around Murphy, and most of the time it’s the hardware rather than the gate itself. Hinges wear out, wheels bind, posts shift after heavy rain, and latch bars stop lining up. Because so many Murphy neighborhoods share builder-standard gate styles, we usually know the exact replacement parts to bring before we arrive. We quote a written price before any work starts, so there are no surprises after the gate is already disassembled. See the full breakdown on our Gate Repair in Murphy page.

Gate Repair in Murphy

Gate Installation in Murphy

A new gate in Murphy usually means matching an existing fence line, a masonry post, or an HOA finish requirement. We install driveway gates, backyard privacy gates, and pedestrian gates, and we can run the electrical for an automatic opener at the same time. Installation is not a same-day job; we measure, give you a written price, order the materials, and schedule a date that works for you. The full scope of what’s included is on our Gate Installation in Murphy page.

Gate Installation in Murphy

Electric Gate Repair in Murphy

Automatic gates fail in Murphy more often after thunderstorms, when moisture reaches control boards or wind knocks the gate out of alignment. We work on nine major gate-operator brands, including LiftMaster, Elite, and FAAC, which covers the majority of openers installed across Murphy’s subdivisions. If the opener is dead, intermittent, or triggering the safety reverse, we’ll diagnose it and give you a written price before any part is replaced. Full details are on our Electric Gate Repair in Murphy page.

Electric Gate Repair in Murphy
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (325) 225-5440

What happens when you call

  1. 1
    A real person answersNo phone trees - you reach a local pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched.
  3. 3
    A background-checked tech heads outLicensed & insured, dispatched right away.
  4. 4
    You approve before work beginsNothing starts until you say go.

Brands We Service in Murphy

We carry parts for Elite, Mighty Mule, LiftMaster, and FAAC, among others. Our technicians arrive already trained on those systems, so most opener repairs in Murphy are completed the same day we show up. You can see the full lineup on our brands page.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Gate Company in Murphy, TX

Service Typical range in Murphy
Gate repair (minor hinge or latch) $180 – $340
Gate repair (moderate structural) $350 – $650
Gate repair (major rebuild or post reset) $700 – $1,500
Gate opener repair $200 – $500
Gate opener replacement $600 – $1,600
Slide gate motor replacement $900 – $2,200
Swing gate actuator replacement $700 – $1,500
Safety sensor repair or replacement $180 – $380
Control board replacement $350 – $800
Gate installation (full, includes gate and hardware) $1,200 – $6,800

In Murphy, prices run higher when a gate is set into brick or stone posts rather than wood, because resetting a post in masonry takes longer. The Kingswell Guarantee means the price you approve in writing is the price you pay, and the guarantee itself is printed on your invoice.

Neighborhoods We Serve in Murphy

We cover all of Murphy, and a typical response window for non-emergency calls is same day or next morning. These are some of the neighborhoods we’re in most often:

  • Maxwell Creek
  • Rolling Ridge
  • Timbers of Murphy
  • Murphy Farms
  • Hunters Glen

Service Area – Cities Near Murphy

Beyond Murphy, we also serve nearby cities across the Metroplex. That includes Dallas, TX, Plano, TX, Grapevine, TX, and Richardson, TX. Scheduling is coordinated from our Dallas-Fort Worth office, and crews serve Murphy locally.

Serving Murphy, TX - Our Local Coverage Area

We’re based in the Murphy area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs About Gate Company in Murphy

Ready to get started? Free estimates · within the hour response in Murphy
Call (325) 225-5440

What happens when you call

  1. 1
    A real person answersNo phone trees - talk to a local gate repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Murphy Customers Say

★★★★★ 5.0 from 5+ reviews

"Hinge sheared off our heavy iron gate. They welded a new one on and it's sturdier than before. Showed up on time and cleaned the driveway after the welding."

- Rhonda Mikula

"Gate wouldn't respond to the remote or the keypad. Turned out to be the control board. They had the part and swapped it the same visit. Quoted it first, no surprises."

- Everett Shaw

"Installed a new gate for us after the old wooden one rotted out. Clean work, showed up on time both days, and the written price didn't change. It swings perfectly."

- Donna Kirkpatrick

Get a Free Estimate

Same-day & emergency service available.

(325) 225-5440 Request Online

How It Works in Murphy

Getting your gate repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate repair needs and we provide an upfront, transparent quote - no obligation, no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Murphy - typically within 30-60 minutes, with parts stocked on the truck.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Murphy - we'll get back to you fast. No obligation.

By sending this request, you agree to the terms of our Privacy Policy and consent to receive communications by phone, email, or text about your service request, including from the local pros who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch
Local Service Coverage
Call Now - 24/7 Dispatch